FIBC use brand-new PE (LLDPE, LDPE, HDPE, etc.) raw materials and good additives to ensure the quality and reliability of the production, while being easy to recycle, and meet environmental protection requirements; refers to the manufacture of packaging containers, packaging decoration, packaging printing, packaging Transportation and other materials used to meet product packaging requirements. Tonnage bags include metal, plastic, glass, ceramics, paper, bamboo, wild mushrooms, fibers, chemical fibers, composite materials and other major packaging materials, as well as coatings, adhesives , Strapping, decoration, printing materials and other auxiliary materials. With the use of new materials, the thickness of the film is gradually reduced and the strength is gradually increased. The comprehensive packaging cost is better than the traditional packaging method; the storage results over the years have been processed to make the stacking higher, which wastes storage space and stacks more. It is neat and more beautiful, with large bags and lower packaging costs than traditional woven bags.

The FIBC bag is made of polypropylene as the main raw material. After adding a small amount of stable condiments, the plastic film is melted and extruded by the extruder, cut into filaments, and then stretched, and then heat-set into high-strength and low-extension The high-speed PP raw yarn is woven and coated to make the base fabric of the plastic woven fabric, which is stitched with slings and other accessories to make a big bag. The rings, slings, and knots are usually completed by a loom; the sewing thread can be nylon thread, polypropylene thread, polyester thread, cotton thread; the produced ton bag must have a safety factor of more than 5 times, that is, its pressure resistance must withstand five times For the strength of the filling weight, it must be moisture-proof. There are three sewing methods for FIBC: flat stitch, interlocking and overlocking. According to user requirements, it can be planned into special requirements. These are fundamentally necessary technologies for the production of large bags to ensure the production of high-quality large bags of goods. Kevin Shi, Sales Manager Tel: +86-755-28111128 Mobile: +86 1537 689 3995 email:kevin@jtbag.com Website:www.jtfibc.com

Today, FIBC or Flexible Intermediate Bulk Containers are the demand for modern packaging needs. Commonly known as Big Bags, these are ideal for both loose and granular materials. These are available in different constructions according to filling and emptying procedures in the industry and thus fulfill wide demands of several sectors like chemical, mining, food and fodder. The FIBC bags manufactured by us are approved by Laboradata Germany which is an independent laboratory for testing the quality of packaging bags. Made of high grade polypropylene fabrics of different weights and strengths, these are designed with excellent UV stabilization feature. More information,please contact us as following: Kevin Shi Sales Manager ShenZhen Riversky packaging materials co., LTD Add:No.9 Riversky Industrial Park Taihe Road Pingdi Longgang Town, Shenzhen, Guangdong, China Tel: +86-755-28111128 Mobile: +86 1571 214 3359 Website:www.jtfibc.com

The main function of the bag is to hold products. Different products use different bags. When using different types of bags, you should follow the normal method to operate, and there are many points of attention in the use process. Take the high temperature resistant ton bag for example, it has a lot of attention points when it is used, let's take a look at the use of high temperature resistant ton bag. 1. Please hang the hook on the central part of the sling or sling, do not hang diagonally, single-sided or diagonally pull high-temperature-resistant ton bags. 2. Do not let the high-temperature-resistant ton bag rub against other objects, hook or collide with the high-temperature ton bag during operation. 3. Do not pull the sling backwards outward. 4. When using a forklift to operate the high-temperature resistant ton bag, please do not let the fork touch or pierce the bag body to prevent the high-temperature resistant ton bag from being punctured. 5. When transporting in the workshop, try to use pallets as much as possible, and avoid lifting the high-temperature-resistant tonnage bag while shaking it while transporting it. 6. Keep the high temperature resistant ton bags upright during loading, unloading and stacking. When you use high-temperature-resistant ton bags in the future, you must pay attention to the points introduced by the editor. www.jtfibc.com

When users use Jiangtian tons of bags, one of the biggest characteristics is a good life span. Only a product with a better life span can make users more satisfied. Of course, there are many reasons for this product to improve life span. First, there will be a good production strength on the product. If a manufacturer does not have enough strength in production, it will be difficult to let it go naturally. It has enough product quality on the product, so when there are users using the product, first of all, we need to pay attention to the strength of its manufacturers. And there are many aspects of strength, some manufacturers have strength in technology, or in equipment, but strength needs to be matched in many ways, so when the manufacturers do not have all the strength, it is difficult to make the product have good quality, and in the production of Jiangtian tons of bags, there are all aspects of strength. Only the strength is insufficient to produce high-life products, but also need to have a good cost concept in production. Now some manufacturers often see that the cost of products has increased a little. When they calculate that their own earnings are less, they begin to reduce costs, either on materials or on product technology, etc., while in Jiangtiantong. This is not the case in the production of bags. Because they have a certain brand, naturally they take their own product image as the top priority, so the products produced by Jiangtian Factory pay special attention to product quality, so it is precisely because they meet the above requirements in production that they will have good product performance in the use of products, and will let users have a good life satisfaction in use. www.jtfibc.com

Recently, at the invitation of Pingxiang Agricultural Bureau of Jiangxi Province, our company specially developed a small-ton bag for tea picking in order to meet the difficulties of tea farmers in the coming year. Originally, tea growers only use ordinary woven bags for tea picking, but because some branches of tea trees are sharp, they often cut through ordinary woven bags, which results in tea scattering. Another reason is that ordinary woven bags are not easy to carry, which leads to inefficient tea picking. For this reason, after several days of research, our R&D staff finally successfully developed this special small ton bag for tea picking. This small ton bag is a suit, a set of two small bags, divided back Lou type back bag and picking type front bag. The feature of this ton bag is that the whole bag is made of ton bag cloth. It is strong, wear-resistant, sunscreen, rain-proof and most importantly easy to carry. First of all, we look at the front bag. The front bag is pierced with a wire ring, so that the mouth of the bag can be propped up. It is convenient to put the picked tea into the bag. Because the front bag uses tons of bags, it is not afraid of the friction of sharp branches, so that the efficiency of tea picking can be improved. The back bag also uses tons of bags and pieces of material, and does not need to be afraid of being broken by branches. The back bag contains two straps, which can be carried on the body, thus solving the problem of carrying difficulties. Welcome new and old customers to come to our company to consult and order tons of bags. All our staff will serve you wholeheartedly. To think what customers want is the foundation of our company.

With the improvement of environmental awareness, the use of jumbo bags will become more and more popular in domestic and international markets, and the market prospects will be better. This provides an opportunity for the development of fibc container bags. We should seize the opportunity to continuously improve equipment level, improve product quality, adjust product structure, enhance strengths and avoid weaknesses, and compete with foreign counterparts in different product grades. An industry will develop healthily and sustainably. www.jtfibc.com

Which good recommendation of Jiangtian Packaging for tons of bags Jiangtian Packaging is mainly engaged in the development and production of plastic woven products such as various kinds of woven bags, container bags, tons of bags, composite woven bags and so on. Jiangtian Packaging has advanced production equipment. Procedures complete, rigorous management, adhering to the business philosophy of "honest cooperation, quality first", focusing on the research and development of plastic knitting products, providing excellent product services for mineral industry, electronics, agriculture and animal husbandry, food, clothing, logistics and other industries at home and abroad, and creating good benefits for customers. In strict accordance with ISO 9001:2008 international quality system, the company has produced a variety of plastic woven bags, container bags and other products that have passed food-grade certification, SGS certification, UN dangerous package certification, CCSI testing, products in line with the EU ROHS lead-free instructions.

Ton bags also known as container bags, FIBC, jumbo bag, big bag, super bag: is a flexible transport packaging containers. Ton bags are divided into PP ton bags and PE ton bags. Woven bag, also known as snakeskin bag. Is a kind of plastic, packaging, its raw materials are generally polyethylene, polypropylene and other chemical plastic raw materials. Tons of bags are basically made of polypropylene or polyethylene and other polyester fiber textile. Shenzhen ton bag Tons of bags are made of polyolefin resin after wire-drawing weaving process, and then cut into different sizes of cylindrical or sheet substrate after coating, and then according to the design requirements of the substrate stitched into a circular or square bag products. The following is to introduce the use of tons of bags and sealing: 1. Usability of ton bags. When designing the tonnage bag, the use and use method of the tonnage bag, such as lifting, transportation mode and loading material performance, should be fully considered. In addition, also need to consider tons of bags by the packaging of goods for food, otherwise should be non-toxic and harmless to food. 2. Sealing of ton bags. If the material of the ton bag is different, the requirement of sealing performance is also different. Such as powder, toxic, afraid of contaminated items and so on on the sealing performance requirements are very strict, easy to be affected by moisture or mildew of the items on the air tightness requirements of tons of bags can not be ignored. So in the design of tons of bags, we need to consider the base cloth coated process and sewing process on the sealing. The above is the introduction of some matters needing attention in the use of tonnage bags. If you have more knowledge about tonnage bags, please

On February 25, the company organized the first training of new employees in 19 years. The general manager personally passed on the company's business philosophy of "honesty first, quality first" to new employees, encouraging them to make up for their weaknesses with diligence, respect for their posts and love their work, and to bring value into play in their respective positions and develop with the company.

At the beginning of the new year, with the arrival of the Spring Festival, the biggest festival in China, our company's production has entered the most intense and busy stage. All staff work overtime and work together to do a good job of pre-stock service for each customer, and do our best to ensure that customer business is not affected. In 2019, our company will adhere to the concept of quality first, integrity and cooperation to continue to move forward, to do a good job in every product, to serve every customer. Looking forward to the cooperation with you in the new year, Jiangtian Packing staff wishes our customers a happy holiday ahead of time. www.jtfibc.com

Dear customers and friends, How do you do! Thank you for your great support to our company in this year! Thank you very much, I wish you a happy New Year in advance, all the best, thriving business, financial resources into a wide range! Our company has decided that the Spring Festival holiday will be from January 25th to February 15th,our company will stop receiving new orders after December 20th according to the actual situation. Please prepare what you need in advance Plan the inventory and send the order to our company before January 10th, so that our company can arrange the production as soon as possible production, delivery, good service to your company. Our company will not arrange shipment during the holiday, we hope your company can cooperate with us! Thank you very much! The above causes your company many inconveniences, also hoped obtains your company's understanding! In the New Year, we will provide you with more comprehensive cooperation with the best service. Continue to provide high quality FIBC bags, tons of bags, big bags. Thank you again and happy new year RIVERSKY PACIKING MATERIAL CO., LTD January 02, 2019

Packaging automation has become an inevitable trend, but the current packaging automation can only be said to be relative, to complete the real automation, there is still a long way to go, will encounter a series of problems. In terms of packaging automation, it uses automated equipment to control and manage the packaging process, so that it can be automatically carried out in accordance with pre-defined procedures. In the whole process of social circulation, packaging can play the role of maintaining, beautifying, publicizing and selling products, and improve the competitiveness of products. In the process of continuous and large-scale industrial production, packaging is the last process. In today's society, packaging automation has been applied to all kinds of industrial production and social construction. The definition of automation is becoming more and more extensive and detailed. Just like in the ton bag industry, the discussion is getting deeper and deeper. From one kind of mechanical automation to the automation of all packaging workshops, from a part of the packaging process to the whole packaging process, the design of the whole production line and the whole workshop will change. It's a certain trend.

Plastic woven bag international standard ISO 23560:23560 international standards 1, plastic woven bag of drop test The international standard ISO 23560:23560 "bulk polypropylene woven bags of food" describes the capacity of the structure of 50 kg or 25 kg woven bag, their size and is suitable for long-term storage and transportation in the bag experiment method. The provisions of this international standard is applicable to transport and store food, such as corn, sugar and pulses of polypropylene (PP) woven bags. The standard provisions: (1) test bag filling quantity: woven bag should be needed to fill the food, if do not have conditions is to find a similar material fill the bag. (2) the drop test should be implemented in three woven bag, should include the following order: 1) tail to fall: woven bag must be from 1.2 m high to fall to the bottom of the bag. 2) straight to fall: woven bag must be from 1.6 m falling down, falling twice before a plane, two other drop in another plane. (3) through the drop test standard: every fall must not break or leak out of the material. Slight leakage, for example, from the stitching the tail and pinhole, if there is influence, in the woven bag provided after improved, no longer occur more leaks, cannot be regarded as unqualified. 2, the international standard of woven bag drop test Woven bag international standards and European standards fall in the same way, at the bottom of the rules or tail falling drop 1.2 meters height, the vertical drop, and down the opening of the letter. At the same time to fall flat or straight fall 1.6 meters high, with bag fell twice, positive and reverse bag fell twice. Flat to a total of 4 times and it is 1.6 meters in height, so there is no lateral fall is also understandable. International standard woven bag in the "test bag filling

In order to further strengthen the fire safety awareness of Riversky packaging employees, improve the ability of responding to emergencies, and correctly grasp the method of using fire extinguishers and escape, with the strong support of the company's leadership and the cooperation of all departments, we organized a third-level fire safety training and drill on the morning at October 29. The fire protection knowledge training is mainly taught by the manager of administration department, mainly from the introduction and use of fire equipment, fire extinguishing methods and matters needing attention, fire danger hidden danger, common sense of emergency self-rescue and other aspects. It has high practicability and operability, and enriches the fire control knowledge of employees. In order to put knowledge into practice, "strike while the iron is hot" popularize the use of the fire extinguisher in the staff, after the training, in the factory held a variety of fire extinguishers fire drill on the playground, emphasizes the use of all kinds of fire extinguishers in the process of technique and matters needing attention, each department staff take turns to practice the operation, finally mastered the use of the fire extinguisher. The company has always regarded safety as the top priority and safety production as the top priority of the company. The company holds fire protection knowledge training and drill on an irregular basis every year and creates a safe and harmonious working environment for all employees through fire protection knowledge training and on-site simulation drill.

The raw materials of plastic woven bags include PP (polypropylene) and PE (polyethylene).Plastic woven bag has light weight, good electrical insulation, corrosion resistance, easy to process and shape. The plastic woven bag has some general characteristics of PP and its own characteristics. As follows: 1, qualitative light, PP is usually lighter, and the density of PP woven bags is about 0. 0-9. 98 grams per cubic centimeter. Common plastic woven fabric, if not filled, is equal to the density of plastic. The density of applied plastic woven is 0. 0-9. 91 grams per cubic centimeter. Knitting is usually lighter than water. 2. High breaking strength In plastic products, plastic woven fabric is a kind of flexible material with high breaking strength, which is related to its molecular structure, crystallization degree, drafting orientation, etc., as well as the type of additive. If the specific strength (strength/specific gravity) is used to measure the plastic woven fabric, it is higher than or close to the metal material. 3. Good chemical resistance Plastic braid has good corrosion resistance to inorganic and organic materials, below 110 degrees Celsius. It has no effect on it for quite a long time. It has strong chemical stability to solvent, grease, etc. When the temperature is high, carbon tetrachloride, xylene, turpentine, etc can swell it. Nitric acid, fuming sulfuric acid, halogen elements and other strong oxides can oxidize nitric acid, which is more resistant to strong alkali and usually acids. 4. Good abrasion resistance The friction coefficient between pure plastic woven fabrics is small, only 0. About 12, similar to nylon, and to some extent, the friction between the plastic woven fabric and its articles, with lubrication. 5. Good electrical insulation

Flexible intermediate bulk containers (FIBCs), also known as [big bags," [bulk bags," and [bulk sacks," were first manufactured in the late 1950s or early 1960s. There is some controversy as to where the first FIBCs were made; however, it is known that FIBCs were made in the United States, Europe, and Japan during the time period mentioned above. The first FIBCs were constructed with heavy-duty PVC-coated nylon or polyester where the cut sheets are welded together to form the FIBC. These FIBCs were made with integrated lift slings around the container, or attached to a specially made pallet, or a metal lifting device that the container sat on. The handling devices allowed the container to be filled from the top and discharged from the bottom.

Global polypropylene (PP) sales will reach $155bn by 2019, driven by strong growth in emerging markets such as plastic woven bags, according to a report by Ceresana Research. Asia-pacific countries now account for more than half of global polypropylene sales, making them a more important market for polypropylene. In the future, the share of the asia-pacific will continue to increase. Global polypropylene production is expected to increase to more than 23.5 million tons by 2019, with 57 percent coming from the asia-pacific region, the report said.

Abstract: it is believed that everyone is familiar with container, which is a large container used to transport and store goods. Today, China's plastic trade net small editor to introduce you to the name of this article and container only one word difference, called the jumbo bag. The jumbo bag is mainly used to carry some scattered and granular materials, which can be transported in unit with the crane.Jumbo bag is a kind of flexible packaging container for transportation, which is widely used in the transportation and packaging of powdery, granular and lumpy goods such as food, grain, medicine, chemical industry and mineral products. Jumbo bag is also called bulk bag, flexible big bag, belongs to the assembly unit device, with the advantages of large capacity space, light weight and convenient loading and unloading. jumbo bag as scattered material packaging materials, mainly the production of raw material is polypropylene, the stability of the mixed some seasoning, after extruding machine of molten plastic film, after a series of cutting, stretching, heat setting, textile, and stitching process after laminating, finally made into bags.